You are here : Krishna Belts  /  Products  /  Bucket Elevator Belts

BUCKET ELEVATOR BELTS

Scope of Work

 
  Reconditioning of the entire belt
  Damaged hole repair
  Both side edge repairs
 
Observations & works undertaken
 
  Top & bottom covers were buffed out completely.
  New uncured rubber was built on the buffed belt.
  All the oval holes were filled up with the uncured rubber. The edges were built with rubber so that the complete width of 700mm was achieved.
  The Green Belt was fed into our press for vulcanization
  The hardness of the covers was brought upto 60 Shore A
  The belt was finally inspected, finished & packed for dispatch
 
 
 
       
        HOME
        KBPL PRODUCTS COMPANY
QUALITY
     - Testing
CONTACT US